Equipment requirements
- Laptop/PC/VM with Windows Vista, 7, 8, 10, 11
- Communication adapter: RP1210C-compatible device (Nexiq USB-Link, Noregon DLA, DPA, Inline, etc.)
- TeamViewer (download the latest version from www.teamviewer.com)
- Cummins INSITE 7.6.2.240 , 8.5.2 , 8.7.x or newer
Please make sure that your version of INSITE is compatible with your engine.
Description
Professional EGR delete tuning for Cummins ISLe CM850 model is available remotely via TeamViewer. The entire reprogramming session is performed directly through your laptop connected to the truck, and the process typically takes no more than 25 minutes from start to finish. We also provide a limited lifetime warranty on the results of our work. No more torque reduction issues.
To get started, select your preferred date and time for the remote appointment and provide any additional required truck information.
Important Notice
DrunkLab LLC:
- Does not accept any returns due to legal incompatibility
- Is not responsible for any legal consequences
- Does not accept warranty claims if the ECU software has been updated by a dealer after tuning
Important legal notice:
- If the laws in your country prohibits this kind of programming, do not order this service.
By clicking “SET APPOINTMENT,” you sign that you have read, understood, and agree to the information below.
Applicability
This remote tuning service is designed for Cummins ISLe engines equipped with CM850 ECM platforms that require an EGR delete.
When is the service needed?
Is the cost of maintaining your Cummins ISLe CM850 emission system too high? Consider our remote tuning service.
CM850 engine emissions errors, a malfunctioning EGR valve, and a stuck EGR valve all lead to a loss of power and poor fuel economy, not to mention a rough engine idle, along with very expensive downtime.
Deleting the EGR system through ECU software reprogramming is part of our remote tuning service. It will eliminate EGR system issues and lower your maintenance costs.
This service is perfect to address reccurring EGR problems or preventive to eliminate problems before they occur. Proactively removing the EGR before it fails means you’ll never have to face those costly repairs and downtime again.
Once tuned, your Cummins ISLe CM850 will run without EGR-related faults, intake manifold clogging, power derates, or exhaust restrictions. The result is a smoother, more responsive, and far more reliable engine with noticeably better fuel economy and fewer trips to the workshop.
Legal framework usage of this service
This is ECM tuning (adjustment) service. The result of this service is improvement the performance characteristics of customer’s equipment.
The service may require additional hardware and/or software tools on the Customer side. See “Equipment requirements” section for the details.
Terms and conditions are determined in the Public Offer Agreement. Full agreement text is located in the Agreement section of this website.
The ECM tuning may cause emission class change. Customer takes full responsibility of technical inspections and certification of his equipment regardless of his jurisdiction and local emissions regulations. DrunkLab LLC will not accept complaints due to certification incompatibilities.
How to get the solution?
Select the desired time for your service to book an engineer to support you
Please note: Our engineers are available on business days from 06:00 to 22:00 UTC (Monday–Friday, 6:00 AM–10:00 PM GMT)
Weekends are out of service.
- Enter the Engine Serial Number (ESN) in the field under the calendar
- Verify that your wallet balance is sufficient to pay for the selected service
- Use any option shown on the order confirmation page to contact us at the booked time
- If you need to reschedule or have technical questions, contact us anytime
- Ensure your laptop, communication interface, required version of diagnostic software (INSITE), and TeamViewer are installed and working properly
- Unplug all emission control components before programming
- Share your TeamViewer credentials with our support team in the support chat 5–10 minutes before the scheduled time
Guides & Instructions
Tuning results
- No EGR — related fault codes
- No torque reduction
- FREE HP upgrade to the maximum manufacturer setting for this CPL (Critical Parts List) and the vehicle specification
- No unrelated parameters will be changed
Required hardware changes after tuning
Failure to complete these steps may result in fault codes, reduced performance, or engine damage.
- Unplug all EGR system sensors
- Physically block the EGR flow (install block-off plates or equivalent)
Warranty Terms and Conditions
This service is covered by the D3LW™ Program — DrunkLab Limited Lifetime Warranty.
Warranty cases are resolved in priority order. The policy is “fix or return,” which means a full refund if it is impossible to fix the problem immediately.
Warranty cases are:
- EGR — related fault code appears during truck usage period
- EGR — related message is shown on the display
- Torque derate caused by EGR fault codes
Non — warranty cases are:
- ECU replacement (different ECU serial numbers detected than those stored into database during reprogramming)
- Software update campaign performed (OEM software detected)
- Copyright violation — tampering, cracking, or readout attempts detected (different fingerprint stored in the ECU)
Company advantages
- Industry expertise: Extensive hands — on experience Cummins ECM tuning, delivering stable, accurate, and safe solutions.
- Quick remote service: Fast remote tuning sessions through TeamViewer with flexible weekday scheduling, short turnaround times, and complimentary HP updates.
- Dependable assistance: 24/7 support via chat and WhatsApp (+995 555 535 577), fast warranty handling, and careful tuning without unnecessary parameter modifications
- Client-oriented approach: Clear legal terms, transparent communication, and long-term warranty coverage for added confidence.
Additional Information
It’s a software modification in the ECU that disables the EGR system on Cummins ISLe engines with the CM850 control module. In plain terms, it stops the engine from using exhaust gas recirculation — something that often turns into a real headache as these engines get older.
This service is mainly for Cummins ISLe CM850 engines that are starting to show typical EGR problems: carbon buildup, rough idle, higher exhaust temperatures, and constant fault codes.
Instead of constantly dealing with a system that likes to clog up and throw sensor errors, we retune the ECU so the engine no longer relies on the EGR. The result is cleaner combustion, more stable operation, and fewer random interruptions — whether you’re doing long hauls or working hard every day.
Most operators notice pretty quickly that the engine becomes easier to live with. It stops throwing emissions-related codes out of nowhere and feels more consistent, especially when loaded up or pulling heavy.
Performance tuning can also be added.
Key Benefits:
- Removes EGR control logic from the CM850 ECU
- Reduces carbon buildup in the intake system
- Helps eliminate recurring EGR fault codes
- Improves stability under load and during long drives
- Lowers stress from high exhaust temperatures
- Performance tuning available
Have any questions
Check our FAQ Section for answers to common technical questions.
Reviews
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.