Equipment requirements
- Laptop/PC/VM with Windows Vista, 7, 8, 10, 11
- Communication adapter: RP1210-compatible device (Nexiq USB-Link, Noregon DLA, DPA, Inline, etc.)
- TeamViewer (download the latest version from www.teamviewer.com)
- Cummins INSITE 8.7.x or newer
Please make sure that your version of INSITE is compatible with your engine.
Description
Professional DPF/SCR/EGR/VGT delete tuning for Cummins engines is available remotely via TeamViewer. The entire reprogramming session is performed directly through your laptop connected to the truck, and the process typically takes no more than 25 minutes from start to finish. We also provide a limited lifetime warranty on the results of our work. No more torque reduction issues.
To get started, select your preferred date and time for the remote appointment and provide any additional required truck information.
Important Notice
VGT delete (Variable Geometry Turbo) is available selectively — not all engine configurations with ECMs are equipped with VGT turbos. If you have problems with an expensive VGT turbo and want to delete it once and for all, write to us in the support chat. We will check your exact engine model and ECM calibration to confirm whether VGT delete is possible in your case.
DrunkLab LLC:
- Does not accept any returns due to legal incompatibility
- Is not responsible for any legal consequences
- Does not accept warranty claims if the ECU software has been updated by a dealer after tuning
Important legal notice:
- If the laws in your country prohibits this kind of programming, do not order this service.
By clicking “SET APPOINTMENT,” you sign that you have read, understood, and agree to the information below.
Applicability
This remote tuning service is designed for a wide range of Cummins engines ECM platforms requiring delete of emission control systems (DPF/SCR/EGR/VGT).
When is the service needed?
If the cost of fixing your Cummins truck’s emission systems or broken turbo components is getting out of hand, our remote tuning service might be exactly what you need.
Derates, loss of power, poor fuel economy, and expensive downtime — these are often caused by a stuck EGR valve, clogged DPF, SCR issues, or a failing VGT turbo. Our remote tuning service solves these problems by professionally deleting the EGR, DPF, SCR, and VGT systems through ECU software reprogramming.
This approach eliminates the most common emissions-related failures and dramatically reduces the ongoing maintenance costs tied to factory emission equipment. And if you prefer to stay ahead of trouble rather than wait for it to happen — this service is perfect for that too. Proactively removing these systems before they fail means you’ll never have to face those hefty repair bills and extended downtime again.
Once tuned, your Cummins engine will run cleanly without constant DPF regeneration cycles, repeated sensor failures, turbo efficiency losses, or power drops caused by soot buildup and excessive exhaust heat.
Legal framework usage of this service
This is ECM tuning (adjustment) service. The result of this service is improvement the performance characteristics of customer’s equipment.
The service may require additional hardware and/or software tools on the Customer side. See “Equipment requirements” section for the details.
Terms and conditions are determined in the Public Offer Agreement. Full agreement text is located in the Agreement section of this website.
The ECM tuning may cause emission class change. Customer takes full responsibility of technical inspections and certification of his equipment regardless of his jurisdiction and local emissions regulations. DrunkLab LLC will not accept complaints due to certification incompatibilities.
How to get the solution?
Select the desired time for your service to book an engineer to support you
Please note: Our engineers are available on business days from 06:00 to 22:00 UTC (Monday–Friday, 6:00 AM–10:00 PM GMT)
Weekends are out of service.
- Enter the Engine Serial Number (ESN) in the field under the calendar
- Verify that your wallet balance is sufficient to pay for the selected service
- Use any option shown on the order confirmation page to contact us at the booked time
- If you need to reschedule or have technical questions, contact us anytime
- Ensure your laptop, communication interface, required version of diagnostic software (INSITE), and TeamViewer are installed and working properly
- Unplug all emission control components before programming
- Share your TeamViewer credentials with our support team in the support chat 5–10 minutes before the scheduled time
Guides & Instructions
Tuning results
- No DPF/SCR/EGR/VGT/NOx — related fault codes
- No torque reduction
- FREE HP upgrade to the maximum manufacturer setting for this CPL (Critical Parts List) and the vehicle specification
Required hardware changes after tuning
Failure to complete these steps may result in fault codes, reduced performance, or engine damage.
- Unplug all DPF/EGR/SCR system sensors
- Physically block the EGR flow (install block-off plates or equivalent)
- Physically remove the DPF (remove the filter entirely from the exhaust system)
- Replace the VGT turbocharger with a single (non-VGT) turbocharger
Strongly recommended (for best reliability and performance):
- Bypass or completely remove the SCR catalyst cans
Warranty Terms and Conditions
This service is covered by the D3LW™ Program — DrunkLab Limited Lifetime Warranty.
Warranty cases are resolved in priority order. The policy is “fix or return,” which means a full refund if it is impossible to fix the problem immediately.
Warranty cases are:
- DPF/SCR/EGR/VGT — related fault code appears during truck usage period
- DPF/SCR/EGR/VGT — related message is shown on the display
- Torque derate caused by DPF/SCR/EGR/VGT fault codes
Non — warranty cases are:
- ECU replacement (different ECU serial numbers detected than those stored into database during reprogramming)
- Software update campaign performed (OEM software detected)
- Copyright violation — tampering, cracking, or readout attempts detected (different fingerprint stored in the ECU)
Company advantages
- Industry expertise: Extensive hands — on experience Cummins ECM tuning, delivering stable, accurate, and safe solutions.
- Quick remote service: Fast remote tuning sessions through TeamViewer with flexible weekday scheduling, short turnaround times, and complimentary HP updates.
- Dependable assistance: 24/7 support via chat and WhatsApp (+995 555 535 577), fast warranty handling, and careful tuning without unnecessary parameter modifications
- Client-oriented approach: Clear legal terms, transparent communication, and long-term warranty coverage for added confidence.
Additional Information
It’s a remote ECU software modification that disables the main emissions and control systems on Cummins engines — including DPF, SCR (AdBlue/DEF), EGR, and VGT, depending on your specific setup.
In simple terms, this is a full Cummins emissions delete tuning solution. It removes the systems that tend to cause the most headaches as these trucks get older. Instead of constantly dealing with clogged filters, forced regenerations, sensor failures, DEF issues, and turbo control problems, the engine is retuned to run without all that extra complexity.
This service is popular on various Cummins platforms where the emissions systems are very tightly integrated and start hurting reliability over time. The main goal isn’t to make the truck “faster” — it’s to make it simpler and more dependable in real-world conditions.
After the modification, the engine stops reacting to emissions-related signals. Most operators notice fewer warning lights, no more forced derates, and much more consistent performance, especially when working hard or doing long hauls. The truck generally feels smoother and less “nervous” on the road.
We don’t use generic files. Each tuning is tailored to your exact engine configuration to keep everything safe and stable after the emissions systems are disabled. Performance tuning can be added.
Key Benefits:
- Disables DPF, SCR, EGR, and VGT control logic (depending on engine)
- Eliminates forced regeneration cycles and related downtime
- Greatly reduces emissions-related fault codes and sensor issues
- Improves throttle response and overall drivability
- Helps prevent limp mode and unexpected derates
- Performance tuning available
Have any questions
Check our FAQ Section for answers to common technical questions.
Reviews (1)
1 review for Cummins DPF/SCR/EGR/VGT delete. Remote tuning service
Only logged in customers who have purchased this product may leave a review.
brandon.angelvillanueva
May 14, 2026
It was a very quick and easy service. The customer support is very responsive allowing me to reschedule without any headaches. Thank you guys again!