Return to previous page

DPF / SCR off all-in-one emulator for Mack trucks 2014+ (US14, US17), Volvo CE (Construction Equipment) 2014+ and Volvo Penta. The result as DPF delete tuning but no need to use laptop and diag adapter!

Exclusive offer for VILKUS-62: Free hardware, free shipping! You pay for software part only! For any model of Vilkus-62.

Main features:

  • No DPF/SCR related fault codes.
  • No torque reduction under any working conditions.
  • Always low soot ratio.
  • NEW!!! Plug-n-Drop technology. No wires! Just plug it instead of ACM and enjoy!
  • HCDEA™ – HamCom Dynamic Emulation algorithm.
  • HCDMA™ – HamCom Direct Memory Access algorithm for total control of soot ratio values.
  • Reversibility.

Compatibility (please read carefully)

Perfect for Mack and Volvo USA trucks manufactured in 2014 and later (Mack MP7, MP8, MP10 engines).

This product supports all Volvo CE machines equipped with one of the following engine:

  • Volvo D3.3J, D4J, D6J, D8J, D9J engines.
  • Volvo D11J, D13J, D16J engines.
  • Volvo D8M, D11M engines.
  • Volvo L-series engines e.g. D13L.
  • Volvo Penta engines with SCR.

Your engine is not in list? Having another questions about compatibility? Please contact us!

In the kit: Emulator module: sealed plastic box with 62-pin connector. Shockproof, waterproof, dustproof, EMI-proof, non-serviceable electronic device.

VIN-lock warning! This device cannot be installed twice. Once connected to the truck/machine it will never work with different VIN. Please don’t use it for demo purposes!

How to install

Important notice for Volvo Construction Equipment. If your machine is already in derate mode or has inerasable codes for NOx sensors, it may require our remote assistance along with device installation. Please prepare your diagnostic laptop, download and run Mochester 4 app, select warranty support service and provide us with short case description in the app.

  1. Unplug your diagnostic adapter from the dial socket (if plugged).
  2. Turn the key off, wait 30sec.
  3. Unplug the connector from ACM module.
  4. Disconnect all NOx sensors. Trucks and machines may have different quantity of sensors. Please use a service manual for your truck/machine for the exact locations.
  5. (Disconnect urea quality sensor)
  6. (Disconnect Particulate Matter Sensor)
  7. Connect the VILKUS-62 Grey emulator instead of ACM.
  8. Turn the key on, wait 1 minute.
  9. Turn the key off, wait 1 minute.
  10. Turn the key on and ensure that all aftertreatment faults are gone.
  11. Done!

Equipment requirements

  • Basic hand tools.
  • Experience of working with truck wirings and connectors.
  • Multimeter and/or scope (in case of troubleshooting).
  • Laptop with Tech Tool and communication interface (in case of remote support).

Warranty terms and conditions

This product is covered by D3LW™ program. D3LW is DrunkLab Limited Lifetime Warranty. Warranty policy is “return and replace”.

Note: We kindly ask you to be careful when connecting this device. Most of claims are due to wrong connection, installation onto an incompatible truck/machine, plugging into a wrong connector or truck harness faults.

VIN-lock warning! This device cannot be installed twice. Once connected to the truck/machine it will never work with different VIN. Please don’t use it for demo purposes!

Warranty cases are:

  • Device stopped working fully or partially during usage period.

Non-warranty cases are:

  • Mechanically damaged device and/or device connector.
  • Removed stickers, serial numbers or trademarks.
  • Corrosion signs due to unsealed or broken harness connector.
  • Device abuse (high voltage, agressive moistures etc).
  • Disassembling attempts and other copyright violations.
  • Reverse engineering attempts or other copyright violations (may also cause your account blocking).


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Booking details

Change time Proceed to payment