We can program the following ECUs: MCM, CPC, ACM, and others.
The ECU must be compatible with the truck’s VIN.
This service is intended for the following cases:
• ECU replacement
• Removal of third-party software tuning
• Dealer access is available, but there are no permissions to download ECU software
• No dealer access is available, and ECU flashing is required
Equipment requirements are simple. Please refer to the “Equipment Requirements” tab for the full list.
IMPORTANT NOTICE:
• This service provides stock programming only
• No additional tuning is included
• Orders with comments such as “Original, but no DPF/EGR please” or similar will be canceled automatically"
By clicking "SET APPOINTMENT," you confirm that you have read, understood, and agree to the above information.
Legal framework usage of this service
This is ECM tuning (adjustment) service. The result of this service is improvement the performance characteristics of customer’s equipment.
The service may require additional hardware and or software tools on the Customer side. See “Equipment requirements” section for the details.
Terms and conditions are determined in the Public Offer Agreement. Full agreement text is located in the Agreement section of this website.
The ECM tuning may cause emission class change. Customer takes full responsibility of technical inspections and certification of his equipment regardless of his jurisdiction and local emissions regulations. DrunkLab LLC will not accept complaints due to certification incompatibilities.
How-To
• Select the desired time for your service to book an engineer to support you
Please note: Our engineers are available on business days from 06:00 to 22:00 UTC (Monday–Friday, 6:00 AM–10:00 PM GMT)
Weekends are out of service.
• Enter the Vehicle Identification Number (VIN) in the field under the calendar
• Verify that your wallet balance is sufficient to pay for the selected service
• Use any option shown on the order confirmation page to contact us at the booked time
• If you need to reschedule or have technical questions, contact us anytime
• Ensure your laptop, communication interface, required version of diagnostic software, and TeamViewer are installed and working properly
• Unplug all emission control components before programming
• Share your TeamViewer credentials with our support team in the support chat 5–10 minutes before the scheduled time
Aftertreatment instructions
REQUIRED HARDWARE CHANGES AFTER TUNING
Failure to complete these steps may result in fault codes, reduced performance, or engine damage.
- Unplug all DPF/EGR/VGT system sensors
- Replace the VGT turbocharger with a single or wastegate (non-VGT) turbocharger
- Physically remove the DPF (remove the filter entirely from the exhaust system)
- Physically block the EGR flow (install block-off plates or equivalen
Equipment requirements:
• Laptop/PC/VM with Windows Vista, 7, 8, 10, 11
• Communication adapter: RP1210C-compatible device (Nexiq USB-Link 1/2, Noregon DLA, DPA5, Inline 6)
• Not recommended for Detroit Diesel tuning: Nexiq 3, DLA3, Scanmatik, Jaltest — due to unstable communication with truck
• TeamViewer (download the latest version from www.teamviewer.com)
Warranty Terms and Conditions
This service is covered by the D3LW™ Program — DrunkLab Limited Lifetime Warranty.
Warranty cases are resolved in priority order. The policy is “fix or return,” which means a full refund if it is impossible to fix the problem immediately.
Warranty cases are:
• DPF/EGR/VGT-related fault code appears during truck usage period
• DPF/EGR/VGT-related message is shown on the display
• Torque derate caused by DPF/EGR/VGT fault codes
Non-warranty cases are:
• ECU replacement (different ECU serial numbers detected than those stored into database during reprogramming)
• Software update campaign performed (OEM software detected)
• Copyright violation — tampering, cracking, or readout attempts detected (different fingerprint stored in the ECU)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.